Most security camera failures don’t come from bad equipment. They come from cameras that were installed just a few inches too high, pointed a few degrees too far off, or placed where they looked right instead of worked right.
One of the biggest surprises for homeowners is realizing that camera placement matters just as much as the camera itself. Small placement mistakes can lead to blind spots, unclear footage, or a system that does not work the way you expected. The good news is that these issues are common and easy to avoid with a bit of planning.
Placing Cameras Too High or Too Low
Mounting cameras too high is a common mistake. While it may feel safer to keep them out of reach, cameras placed too high often miss important details like faces or activity near doors. On the other hand, cameras mounted too low can be easier to tamper with and may not capture a wide enough view. Cameras should be high enough to stay secure but positioned at a height that allows them to capture clear, useful footage.
Ignoring Lighting and Glare
Lighting plays a big role in how well security cameras perform. Cameras that face direct sunlight can struggle during certain times of day, while nearby exterior lights, windows, or reflective siding can cause glare.
At night, poor lighting angles can interfere with night vision and motion detection. Thinking about how light changes throughout the day helps avoid washed-out footage and missed details.
Leaving Blind Spots Around Entry Points
Many homeowners focus on the front door and overlook other entry points. Side doors, back entrances, garages, and ground-level windows are often missed when placing cameras.
These blind spots can limit how effective your security system really is. A good camera layout considers how people actually move around the property, not just the most obvious entrance.
Not Testing the Camera’s Field of View Before Final Mounting
Another common mistake is mounting a camera without checking the live view first. From the ground, a camera may look perfectly placed, but the footage might cut off walkways, miss key angles, or capture too much empty space.
Testing the field of view before final mounting allows small adjustments that can greatly improve coverage. A few inches can make a noticeable difference in what the camera actually sees.
Overlooking Power and Wiring Safety
Security cameras need a reliable and safe power source. Running cords through windows or doors, using indoor-rated outlets outdoors, or relying on temporary power setups can lead to loose connections and electrical issues.
Proper wiring supports long-term performance and helps prevent problems like tripped outlets or unreliable cameras. Planning power and wiring early is just as important as deciding where the cameras will go.
Get Expert Help With Your Home Security Camera Installation
Proper camera placement makes all the difference when it comes to reliable home security. Avoiding common placement mistakes helps ensure clear footage, full coverage, and a system that works the way it should. A licensed electrician can assess your home, identify potential blind spots, and make sure each camera is positioned and powered safely for long-term performance.
If you’re planning to secure your home with a Lorex security system, you can contact Janusz Electric as our team professionally installs Lorex security cameras with careful attention to placement, wiring, and electrical safety, so your system performs exactly as intended from day one.
Call Janusz Electric today or request a quote online to get expert help with your Lorex security camera installation across New Hampshire and Massachusetts.
